Back in January XBMC released the long awaited Frodo 12.0 for all of your Apple products. Now you can install XBMC on your iPads, iPhones, iPods, and your, glorious, little Apple TV 2. The installation is almost the exact same as installing previous builds of XBMC with 4 subtle differences. Here we have put together a guide that incorporates these changes. So, sit back, relax and grab a cup of coffee.

Note: XBMC is not yet compatible with the 5.1+ Apple TV software. XBMC Developer Memphiz said on XBMC forum that the team is “trying their best” to make XBMC running on Apple TV 5.2. XBMC now available on iOS 6.1 for Apple TV

Upgrading An Existing Installatin Of XBMC EDEN 11.0

So you may be asking the question, “what do I do if I already have XBMC Eden installed on my Apple TV?” If this is the case, we have a few tips for you specifically. After extensive testing throughout the BETA phase, the team at XBMCHUB.COM has discovered that you will find the best results by simply doing a fresh install of XBMC Frodo. Yes, it is possible to back up your settings and reinstall your preferences but this often leads to many of the same issues.

It is not the happy news you may have wanted, but it ends up that XBMC Frodo plays nicest with your Apple TV when you uninstall XBMC, and all of your presets, from your device. Though I am unsure where the problem is located when upgrading directly… The problem is there all the same.

Installing A Fresh Version Of XBMC FRODO 12.0

Requirements

• Jailbroken ATV2 running firmware 5.0.2 or older
• Mac computer (use Terminal App)  or Windows PC (use PuTTY App)

Step 1: Launch the “Terminal” or “PuTTY” application.

Step 2: Ensure that your computer and your Apple TV are on the same network.

Step 3: Connect to your Apple TV via SSH using the following commands.

• ssh root@[Your Apple TV’s I.P. Address]

Example: ssh root@192.168.2.18
This can be found under General/Network on your ATV’s main menu

Note: Should you receive an “Authentication Error,” copy and paste the following command into the Terminal window and press Enter, then continue.

• rm ~/.ssh/known_hosts

Step 4: Agree to any Security Prompts by typing “yes” (without quotations), then press Enter.

Step 5: When prompted for a Password, type the word “alpine” (without quotations) then press Enter.

Step 6: Copy and Paste the Following Commands into your Terminal App, pressing the Enter key after each. It’s important that you wait for each one to finish before moving onto the next. Don’t worry… you will know when each line is finished.

1)      apt-get install wget
2)      wget -O- http://apt.awkwardtv.org/awkwardtv.pub | apt-key add -
3)      echo “deb http://apt.awkwardtv.org/ stable main” > /etc/apt/sources.list.d/awkwardtv.list
4)      echo “deb http://mirrors.xbmc.org/apt/atv2 ./” > /etc/apt/sources.list.d/xbmc.list
5)      apt-get update
6)      mkdir -p /Applications/AppleTV.app/Appliances
7)      apt-get install org.xbmc.xbmc-atv2
8)      mkdir -p /Applications/XBMC.frappliance
9)      reboot

Step 7: Once the Apple TV menu reloads, Launch XBMC into XBMC Frodo.

Step 8: To ensure the new build fits your screen, let’s enter the “Settings” sub menu under the “SYSTEM” heading.

Step 9: Select the “Appearance” tab from the left menu bar.

Step 10: Under the “Skin” menu, you’ll now want to choose “-4%” for the “Zoom” field so that your XBMC configuration will properly fit your television display. Depending on the television, you might have to play around with this, but it should work flawlessly at the “-4%” setting. Press “MENU” on your Remote Control to return back one level once this is done.

Step 11. Also worth noting: in XBMC 12.0 you will need to set up your sound. For this simply navigate to Settings/System/Audio Output go to the second option from the bottom and sleet the audio option that is right for you. Afterwards, go to the very first option and select between HDMI and Analog. If you are unsure… you are on HDMI.

Congratulations! Your Apple TV now has XBMC Frodo installed on it, and fitting on your screen. Now, that wasn’t so bad, was it?

Visit What's on iPhone for the best iPad and iPhone app reviews!
Do you want to feel like a wizard? Check the Kymera wand in Amazon: You can control your Apple TV waving a wand!

If you are one of our faithful fans who have XBMC Eden (11.0) installed on your jailbroken Apple TV 1, Apple TV 2, or any other device for that matter, we have some exciting news for you: the development team over at xbmc.org has been hard at work, this past month, preparing to release the latest iteration of their multimedia center software known only as Frodo (12.0). This update comes complete with a great deal of improvements, bug fixes, and extended hardware support. The real question is what will this mean for us Apple TV junkies. Well, this new build offers:

• HD audio support, including DTS-MA and Dolby True-HD, via the new XBMC AudioEngine (OSX/iOS not yet available)
• Live TV and PVR support
• h.264 10bit (aka Hi10P) video software decoding for anime
• 64bit support in OSX to match the 64bit support in Linux
• Improved image support, allowing the database to accomodate numerous additional image types and more interesting and complex skins
• Support for the Raspberry PI
• Initial support for the Android platform
• Improved AirPlay support across all platforms, including AirPlay audio in XBMC for Windows to match the other platforms
• Improved controller support in Windows and Linux
• Advanced Filtering in the library
• Video library tags to complement movie sets
• Advanced UPnP sharing
• Default video languages now match the language being used by XBMC
• Translations now powered by Transifex

For you Apple TV fans, one of the biggest adjustments is the extended support for H.D. audio. This latest builds helps enable you to make the most of the audio capabilities that the Apple TV has to offer. Aside from these listed improvements, you will see many changes under the hood. Some of these are great to see, others are a bit frustrating. One of the more exciting features, to me, is the inclusion of something known as skin.widgets. This tool makes skinning a much better experience. If you want to get a real idea of what this means for skins in Frodo, look no further than SiO2 by a developer named fastcolors. This skin is designed with you in mind.

Read also:How to change skins in XBMC on Apple TV

In contrast, one of the frustrating items is the fact that we lose the use of last.FM playback in this latest build. They explained this on their blog, at xbmc.org, as something that was unavoidable do to the changes in the coding, but it is missed none the less. It is also worth noting that there are quite a few add-ons/skins that are not currently supported in Frodo. Usually, this is not a problem as developers can easily make changes to get their add-ons/skins working in the latest XBMC build. Sadly, there are quite a few devs, of some well known add-ons/skins, that are no longer actively keeping their items up to date. This means that we may lose some of our favorite add-ons/skins in the upgrade. Time will tell.

All in all. It is worth the update. As a rule, we should always upgrade as it only improves the overall experience. If an add-on, or skin, is missed enough, someone will get it working again!

Visit What's on iPhone for the best iPad and iPhone app reviews!
Do you want to feel like a wizard? Check the Kymera wand in Amazon: You can control your Apple TV waving a wand!

It now seems as if it has been years since we began the wait for an Apple TV 3 jailbreak! The truth is, I have grown tired of the wait and decided to look into what I could do with my existing Apple TV 1 & Apple TV 2. What I found was an tool known as OpenELEC 2.0! OpenELEC is one of the projects that aims to give users the ability to install XBMC as a standalone operating system for a wide variety of devices. What OpenELEC has done is build a stable version of XBMC using Linux and then create an installable package, integrated with a host of drivers, for a growing number of machines, including: old & new laptops, old & new desktop computers, raspberry pi boxes, and, yes, even your old Apple TV 1! Sadly, due to the software/hardware, the Apple TV 2 is not supported.

OpenELEC is not, necessarily, new to the Apple TV scene. What is new is that they have recently released OpenELEC 2.0, a stable version of their software based on XBMC Eden. This gives the Apple TV a strong and stable, standalone, XBMC experience. With it being an Eden build, it even offers your little silver box AirPlay! The team has added a few functionality increases to XBMC and even has a custom group of add ons and services that are made available to OpenELEC users only. These tools alone, make this a project worth looking at! If you are interested, you can find more specific information for this project at openelec.tv. To save you the visit, here are some of the key points made by their team:

What is OpenELEC?

Open Embedded Linux Entertainment Center, or OpenELEC for short, is a small Linux distribution built from scratch as a platform to turn your computer into a complete XBMC media center. OpenELEC is designed to make your system boot as fast as possible and the install is so easy that anyone can turn a blank PC into a media machine in less than 15 minutes.

Key Features:

• It’s completely free
• Full install only 80-125MB
• Minimal hardware requirements
• Trivial install onto HDD, SSD, Compact Flash, SD card, pen drive etc
• Optimized builds for Atom, ION, Intel, Fusion etc
• Simple configuration via XBMC
• Plug and Play external storage
• File sharing out of the box

Required?

1. Mac, or Linux, computer
2. USB Stick,with at least 1 Gig of memory (to be on the safe side)
3. Apple TV 1
4. Remote Control
5. 10-20 minutes

STEP 1:
Connect the USB key to your machine, then open your Terminal app (For Mac it is located in /Applications/Utilities) and cut/paste the following commands to download the AppleTV SwissArmyKnife USB creator script for Mac OS X:

• curl -O http://chewitt.openelec.tv/atv_swissarmyknife_osx.sh
• chmod +x atv_swissarmyknife_osx.sh
• sudo ./atv_swissarmyknife_osx.sh

STEP 2:

The script will ask you confirm the /dev/disk# for the USB Drive. It runs with root privileges so please be careful with your selection! You will see a list of all current drives available on your machine… so simply look for the name and size of your thumb drive. Once the target device has been confirmed the script will repartition the USB Stick, download files needed to boot the AppleTV (11MB) and then install them to the thumb drive. It should take no more than a couple of minutes to complete, at best.


PLEASE NOTE: If you choose the wrong drive, you could accidentally delete important content. Make sure you read the list of available devices carefully. Mine, for example was a 2 GIG drive that I named UMOUCH-ATVH. Once I knew the drive, I entered “/dev/disk2″ and hit Enter. You are then prompted to confirm the election… type in “Y” for yes. When complete, your output will match the image below:.STEP 3:
Power the AppleTV OFF and then connect the USB Stick to the single USB port, between the Ethernet port and the Power Cable on the back of your device.

STEP 4:
Power the AppleTV ON (Plug it in). After 10-15 seconds you should see the Grey/Blue OpenELEC logo on the screen, then the “SwissArmyKnife script” will start and confirm the current keyword function. The default keyword is “install”. This is where the device will download the OpenELEC software from the OpenELEC website.

STEP 5:
Before anything destructive is done, the installer will pause for roughly 30 seconds, and display a warning message; this ensures you enough time for you to power the AppleTV off (remove the power cable) before anything is changed. After the 30 second wait the installer continues. 

What is Happening  (advanced):

Once it completes, a message will be displayed telling you it is safe to remove the USB key and reboot.

That’s It! If you followed the steps correctly, you should have XBMC running as your standalone operating system! If you had any troubles with the process, openELEC has a great source for troubleshooting any, and all, issues: Troubleshooting USB Key Creation & Opperating System!

Visit What's on iPhone for the best iPad and iPhone app reviews!
Do you want to feel like a wizard? Check the Kymera wand in Amazon: You can control your Apple TV waving a wand!

We have had XBMC 11.0 Eden for 8 months now and, if you are anything like me, it is time to begin the process of upgrading our XBMC installations to the new & improved XBMC 12.0 Frodo. The process should be fairly straight forward and essentially identical to the process we used for install the previous version of XBMC. Before we get started let’s clear the air on a few points so that we are all on the same page:

• This is a BETA release and as such may result in some unexpected behaviors.
• This is the 1’st BETA XBMC has released, there will be more to come.
• XBMC Frodo can cause a good time and may be habit forming.
• To install Frodo to Apple TV 1 you will need to:

- Visit OpenElec.tv regarding their 2.0 project
- Visit Stnlabs.comregarding their 2.0 project

How to install XBMC 12.0 Frodo (beta 1) APPLE TV 2 (Running iOS 5+)

Requirements

• Jailbroken ATV2 running iOS 5+
• Mac Computer (use Terminal App)
• Windows PC (use PuTTY App)

Step 1: Launch the “Terminal” or “PuTTY” application.

Step 2: Ensure that your computer and your Apple TV are on the same network.

Step 3: Connect to your Apple TV via SSH using the following commands.

• ssh root@[Your Apple TV’s I.P. Address]

Example: ssh root@192.168.2.18
This can be found under General/Network on your ATV’s main menu

Note: Should you receive an “Authentication Error,” copy and paste the following command into the Terminal window and press Enter, then continue.

• rm ~/.ssh/known_hosts

Step 4: Agree to any Security Prompts by typing “yes” (without quotations), then press Enter.

Step 5: When prompted for a Password, type the word “alpine” (without quotations) then press Enter.

Step 6: Copy and Paste the Following Commands into your Terminal App, pressing the Enter key after each. It’s important that you wait for each one to finish before moving onto the next. Don’t worry… you will know when each line is finished.

1)      apt-get install wget

2)      wget -O- http://apt.awkwardtv.org/awkwardtv.pub | apt-key add -

3)      echo “deb http://apt.awkwardtv.org/ stable main” > /etc/apt/sources.list.d/awkwardtv.list

4)      echo “deb http://mirrors.xbmc.org/apt/atv2 ./” > /etc/apt/sources.list.d/xbmc.list

5)      apt-get update

6)      apt-get install org.xbmc.xbmc-atv2

7)      reboot

Step 7: Once the Apple TV menu reloads, Launch XBMC into XBMC Frodo!

Step 8: To ensure the new build fits your screen, let’s enter the “Settings” sub menu under the “SYSTEM” heading.

Step 9: Select the “Appearance” tab from the left menu bar.

Step 10: Under the “Skin” menu, you’ll now want to choose “-4%” for the “Zoom” field so that your XBMC configuration will properly fit your television display. Depending on the television, you might have to play around with this, but it should work flawlessly at the “-4%” setting. Press “MENU” on your Remote Control to return back one level once this is done.

Congratulations! Your second generation Apple TV running iOS 5+ now has XBMC Frodo installed on it, and fitting on your screen. Now that wasn’t so bad… was it?

• More on FRODO from Apple TV Hacks : XBMC 12.0 Frodo (beta 1) released: One media center to rule them all!
• More on FRODO from XBMC.ORG
• Installation on other platforms.

Visit What's on iPhone for the best iPad and iPhone app reviews!
Do you want to feel like a wizard? Check the Kymera wand in Amazon: You can control your Apple TV waving a wand!

If a jailbroken Apple TV loaded with XBMC 11.0 “Eden” was not enough for you, we have some great news. XBMC has just released their first public BETA of XBMC 12.0 “Frodo”. The team has been hard at work pushing out one of their fastest, and most feature-rich, upgrades in history. As of the release of Eden, XBMC’s current stable build that is likely installed on all of your Apple TV’s, the team promised the beginning of a new monthly building plan that would hopefully expedite the process of fixing bugs and updated releases. As of this week, it would appear that this plan has, in fact, worked.

For those of you who have been following XBMC you will notice that the naming paradigm has shifted with this release. Up to now, XBMC has named all of their releases according fantastical points on the map, either real or imagined, such as Camelot, Babylon, and Eden. With the release of 12.0, now in the “F” category, the team did something special in naming it FRODO. Where I initially thought the name was chosen to pay homage to one of my favorite literary characters from a ‘certain collection’ of stories, I was surprised to learn that it was actually intended to honor a team member. I will let them explain:

Ten years ago, an individual with the username Frodo joined the Xbox Media Player team, bringing along his open source software project called YAMP. With the addition of Frodo’s project the three founders, Frodo, d7o3g4q, and RUNTiME, released the first non-beta version of the Xbox Media Player – XBMP 2.0 – as open source software. Frodo then spearheaded the move from XBMP to the more feature rich XBMC, including acting as the primary author for the initial UI engine.

XBMC FRODO FEATURES (that ATV owners will enjoy):

• HD audio support, including DTS-MA and Dolby True-HD, via the new XBMC Audio Engine
• Live TV and PVR support [this is awesome news!]
• h.264 10bit (aka Hi10P) video software decoding for anime
• 64bit support in OSX to match the 64bit support in Linux
• Improved image support, allowing the database to accommodate numerous image types
• Improved Airplay support across all platforms
• Advanced Filtering in the library
• Advanced UPnP sharing numerous JSON-RPC updates, including PVR support, optimizations, better conflict handling, and better webserver support by Montellese
• PVR timeshift support (if the backend supports timeshift)
• the CD ripper now works in the background thanks to Spiff
• panoramic photo panning support

PLEASE NOTE

In hopes to give you the best information possible, we felt it would be worth pointing out that, though this is exciting, this is a BETA release! This version has yet to be labeled STABLE for a reason. For many people these builds work out just fine, as XBMC is a fantastic team, but this can vary from machine to machine. So in the heart of full-disclosure, here are a few words of warning from XBMC Developers themselves:

Needless to say, this is beta software. You should absolutely expect problems to occasionally crop up. At present, we are anticipating a number of issues as we switch XBMC over from the Eden addon repository to a new Frodo repository, including partly broken skins and various scripting/scrapers errors. Please bear with us if these problems do crop up. Additionally, PVR users will not be able to switch channels via the channel up/down buttons using their remotes or CEC due to a slight change in the way PVR keymaps are being handled. We are aware of this issue and should have it fixed by Beta2.

For those of you who may be chomping at the bit to get a glimpse of the newest build, in action, on your Apple TV(1 or 2) simply check back with us shortly. We will be posting a complete guide on how to install Frodo on your Apple TV!

More news on FRODO from XBMC.ORG.

Visit What's on iPhone for the best iPad and iPhone app reviews!
Do you want to feel like a wizard? Check the Kymera wand in Amazon: You can control your Apple TV waving a wand!