Back in January XBMC released the long awaited Frodo 12.0 for all of your Apple products. Now you can install XBMC on your iPads, iPhones, iPods, and your, glorious, little Apple TV 2. The installation is almost the exact same as installing previous builds of XBMC with 4 subtle differences. Here we have put together a guide that incorporates these changes. So, sit back, relax and grab a cup of coffee.

Note: XBMC is not yet compatible with the 5.1+ Apple TV software. XBMC Developer Memphiz said on XBMC forum that the team is “trying their best” to make XBMC running on Apple TV 5.2. XBMC now available on iOS 6.1 for Apple TV

Upgrading An Existing Installatin Of XBMC EDEN 11.0

So you may be asking the question, “what do I do if I already have XBMC Eden installed on my Apple TV?” If this is the case, we have a few tips for you specifically. After extensive testing throughout the BETA phase, the team at XBMCHUB.COM has discovered that you will find the best results by simply doing a fresh install of XBMC Frodo. Yes, it is possible to back up your settings and reinstall your preferences but this often leads to many of the same issues.

It is not the happy news you may have wanted, but it ends up that XBMC Frodo plays nicest with your Apple TV when you uninstall XBMC, and all of your presets, from your device. Though I am unsure where the problem is located when upgrading directly… The problem is there all the same.

Installing A Fresh Version Of XBMC FRODO 12.0

Requirements

• Jailbroken ATV2 running firmware 5.0.2 or older
• Mac computer (use Terminal App)  or Windows PC (use PuTTY App)

Step 1: Launch the “Terminal” or “PuTTY” application.

Step 2: Ensure that your computer and your Apple TV are on the same network.

Step 3: Connect to your Apple TV via SSH using the following commands.

• ssh root@[Your Apple TV’s I.P. Address]

Example: ssh root@192.168.2.18
This can be found under General/Network on your ATV’s main menu

Note: Should you receive an “Authentication Error,” copy and paste the following command into the Terminal window and press Enter, then continue.

• rm ~/.ssh/known_hosts

Step 4: Agree to any Security Prompts by typing “yes” (without quotations), then press Enter.

Step 5: When prompted for a Password, type the word “alpine” (without quotations) then press Enter.

Step 6: Copy and Paste the Following Commands into your Terminal App, pressing the Enter key after each. It’s important that you wait for each one to finish before moving onto the next. Don’t worry… you will know when each line is finished.

1)      apt-get install wget
2)      wget -O- http://apt.awkwardtv.org/awkwardtv.pub | apt-key add -
3)      echo “deb http://apt.awkwardtv.org/ stable main” > /etc/apt/sources.list.d/awkwardtv.list
4)      echo “deb http://mirrors.xbmc.org/apt/atv2 ./” > /etc/apt/sources.list.d/xbmc.list
5)      apt-get update
6)      mkdir -p /Applications/AppleTV.app/Appliances
7)      apt-get install org.xbmc.xbmc-atv2
8)      mkdir -p /Applications/XBMC.frappliance
9)      reboot

Step 7: Once the Apple TV menu reloads, Launch XBMC into XBMC Frodo.

Step 8: To ensure the new build fits your screen, let’s enter the “Settings” sub menu under the “SYSTEM” heading.

Step 9: Select the “Appearance” tab from the left menu bar.

Step 10: Under the “Skin” menu, you’ll now want to choose “-4%” for the “Zoom” field so that your XBMC configuration will properly fit your television display. Depending on the television, you might have to play around with this, but it should work flawlessly at the “-4%” setting. Press “MENU” on your Remote Control to return back one level once this is done.

Step 11. Also worth noting: in XBMC 12.0 you will need to set up your sound. For this simply navigate to Settings/System/Audio Output go to the second option from the bottom and sleet the audio option that is right for you. Afterwards, go to the very first option and select between HDMI and Analog. If you are unsure… you are on HDMI.

Congratulations! Your Apple TV now has XBMC Frodo installed on it, and fitting on your screen. Now, that wasn’t so bad, was it?

Visit What's on iPhone for the best iPad and iPhone app reviews!
Do you want to feel like a wizard? Check the Kymera wand in Amazon: You can control your Apple TV waving a wand!

The FireCore team’s aTV Flash software, known as “black”, has recently been updated to version 2.2. This update incorporates support for Apple’s latest 5.2 software update (iOS 6.1), which officialy opened up support for Bluetooth devices to pair with your Apple TV. This is very exciting for those of you who had accidentally, or perhaps purposely, updated your black boxes in the past weeks. For those of you who have not yet updated your device, you need to consider one important question prior to clicking that software update option. The question before you is simply: “do I use Plex, Remote HD, Rowmote, or XBMC on my Apple TV?” If your answer is yes you may want to hold off on the Apple update as Apple’s latest software update also breaks these tools. We are sure this will be fixed, but as of now any Apple TV running 5.1 or higher will not have access to the items listed above.

That aside, aTV Flash (black) 2.2 has some exciting features for those of us already on the latest update. They have managed to integrate the Bluetooth keyboard functionality into all of their special features and additions to iOS. This means you get a fell keyboard experience while surfing the web, navigating their menus, and searching for content.

Other things we will see in aTV Flash (black) 2.2 update:

• Minor improvements to backups
• Minor improvements to DVD playback
• A handful of other bug fixes and improvements

WHAT DOESN’T WORK

3rd party plugins such as:

• XBMC
• Plex
• Remote HD
• Rowmote

are not yet compatible with the 5.1+ Apple TV software.

@thomashw, the developer of Plex client for Apple TV, has already confirmed on Plex forum that he will work on getting Plex working on the latest Apple TV software.

XBMC Developer Memphiz said on XBMC forum that the team is “trying their best” to make XBMC running on Apple TV 5.2. XBMC now available on iOS 6.1 for Apple TV

WHAT WORKS

Taking a look at the features/tools that typically comes with aTV Falsh (black), and subtracting the third-party software options/tools which are broken by Apple’s 5.1+ update, we are left with the follow list:

• AirControl
• Couch Surfer Pro
• Last.fm
• Maintenance
• Media Player
• RSS Player
• RSS Feeds
• Weather

HOW TO UPDATE

aTV Flash (black) 2.2 is compatible with any and all ATV2s running a minimum of 4.4 and up, so updating to 5.2 is not required. However, if you are wondering what the best way is to update, who better to listen to then the FireCore team themselves:

1. Backup your settings through the Maintenance > Manage Backups menu.
2. Run the latest version of Seas0nPass to update the Apple TV to 5.2.
3. Download and install the new 2.2 version of aTV Flash (black).
4. Install any desired items through the Maintenance > Manage Extras menu.
5. Restore the previously saved settings through the Maintenance > Manage Backups menu.
   
6. That’s it!

If you’re not yet using aTV Flash (black) you can get started here.

Visit What's on iPhone for the best iPad and iPhone app reviews!
Do you want to feel like a wizard? Check the Kymera wand in Amazon: You can control your Apple TV waving a wand!

Following the last week’s release of evasi0n iOS 6.0-6.1 jailbreak, FireCore has updated its Seas0nPass to provide an untethered jailbreak for Apple TV 2 running the latest 5.2 (iOS 6.1) firmware. Released in January, Apple TV software update 5.2  for the 2nd and 3rd generation Apple TV added Bluetooth keyboard support, iTunes in the Cloud and AirPlay audio for videos.

Some 3rd party plugins such as Plex, Remote HD and Rowmote are not yet compatible with the 5.1+ Apple TV software. The developer of Plex client is already working on getting its plugin working on the latest Apple TV firmware.

Update: XBMC now available on iOS 6.1 for Apple TV

aTV Flash (black) has also been updated and now supports Apple TV 5.2.

NOTE: The current version of Seas0nPass doesn’t provide a jailbreak for the Apple TV 3.

Here is a step by step tutorial on how to untether jailbreak Apple TV 2 5.2 using Seas0nPass:

Pre-launch checklist

1. Download and install the latest version of iTunes (check for updates through Software Update located in Apple menu).
2. Download Seas0nPass for Mac [10.6 or later] or Windows [XP or later].
3. A micro USB cable will be required to complete the jailbreak.
4. Disconnect any iPods, iPhones, and iPads from your computer.

Jailbreaking

Step 1: Unzip the ‘Seas0nPass.zip’ file and launch Seas0nPass.

Step 2: Select the ‘Create IPSW’ button to start the jailbreak process.

Step 3: The latest Apple TV software will be downloaded and used to create a custom ‘jailbroken’ software file.

Step 4:When prompted, connect your Apple TV using a micro-USB cable (leave power disconnected).

Once the light on the front of the Apple TV begins to flash rapidly, point the remote at the AppleTV and hold both the MENU and PLAY/PAUSE buttons for 7 seven seconds.

Note: This step will require the silver (aluminum) Apple TV remote that was included with the ATV2. The older, white (plastic) remotes will not work.

Step 5: iTunes will open automatically and start the restore process.

Step 6: iTunes will confirm the restore when complete – your Apple TV is now jailbroken.

Note: To confirm the jailbreak was successful a (temporary) red FC logo will appear in the lower right corner of the screen – as shown below.

Enjoy!

Be sure to follow us on Facebook, Twitter or Google+ for the latest updates on Apple TV 3 jailbreak status.

Visit What's on iPhone for the best iPad and iPhone app reviews!
Do you want to feel like a wizard? Check the Kymera wand in Amazon: You can control your Apple TV waving a wand!

If you are one of our faithful fans who have XBMC Eden (11.0) installed on your jailbroken Apple TV 1, Apple TV 2, or any other device for that matter, we have some exciting news for you: the development team over at xbmc.org has been hard at work, this past month, preparing to release the latest iteration of their multimedia center software known only as Frodo (12.0). This update comes complete with a great deal of improvements, bug fixes, and extended hardware support. The real question is what will this mean for us Apple TV junkies. Well, this new build offers:

• HD audio support, including DTS-MA and Dolby True-HD, via the new XBMC AudioEngine (OSX/iOS not yet available)
• Live TV and PVR support
• h.264 10bit (aka Hi10P) video software decoding for anime
• 64bit support in OSX to match the 64bit support in Linux
• Improved image support, allowing the database to accomodate numerous additional image types and more interesting and complex skins
• Support for the Raspberry PI
• Initial support for the Android platform
• Improved AirPlay support across all platforms, including AirPlay audio in XBMC for Windows to match the other platforms
• Improved controller support in Windows and Linux
• Advanced Filtering in the library
• Video library tags to complement movie sets
• Advanced UPnP sharing
• Default video languages now match the language being used by XBMC
• Translations now powered by Transifex

For you Apple TV fans, one of the biggest adjustments is the extended support for H.D. audio. This latest builds helps enable you to make the most of the audio capabilities that the Apple TV has to offer. Aside from these listed improvements, you will see many changes under the hood. Some of these are great to see, others are a bit frustrating. One of the more exciting features, to me, is the inclusion of something known as skin.widgets. This tool makes skinning a much better experience. If you want to get a real idea of what this means for skins in Frodo, look no further than SiO2 by a developer named fastcolors. This skin is designed with you in mind.

Read also:How to change skins in XBMC on Apple TV

In contrast, one of the frustrating items is the fact that we lose the use of last.FM playback in this latest build. They explained this on their blog, at xbmc.org, as something that was unavoidable do to the changes in the coding, but it is missed none the less. It is also worth noting that there are quite a few add-ons/skins that are not currently supported in Frodo. Usually, this is not a problem as developers can easily make changes to get their add-ons/skins working in the latest XBMC build. Sadly, there are quite a few devs, of some well known add-ons/skins, that are no longer actively keeping their items up to date. This means that we may lose some of our favorite add-ons/skins in the upgrade. Time will tell.

All in all. It is worth the update. As a rule, we should always upgrade as it only improves the overall experience. If an add-on, or skin, is missed enough, someone will get it working again!

Visit What's on iPhone for the best iPad and iPhone app reviews!
Do you want to feel like a wizard? Check the Kymera wand in Amazon: You can control your Apple TV waving a wand!

I can host websites on my Apple TV! Jealous? It is no secret that with a lot of tinkering, your little gadgets (iPhones, iPods, iPads, and even your Apple TV’s) can be converted into a great many things, including servers. You can take one of your extra Apple TV’s 2 and, with a bit of tinkering, get it set up as your very own, private, web based server for hosting websites and much more.

This is not a new idea, necessarily, but it has always been a bit of a long process to enable these types of features, and/or functionalities, on your device. Well, that was until now. We were recently informed of a new package – iOS-WebStack, which is now available in Cydia, that makes this process as easy as one repo, and one install. So, before I go on, let’s hear from the developer - Jason Anrugas – himself:

Because I would like host some web content with my jailbroken Apple TV 2, I 
have compiled a whole web stack composition with Lighttpd, PHP and MySQL. 
Regarding security issues and restrictions on software dependencies, all 
the software packages are up to date.

With this iOS WebStack I can host web content like on an Linux server. I 
don’t have unresolved dependencies as with the packages from the major 
repositories. Like XAMPP or LAMP you can install my Lighttpd/PHP/MySQL iOS WebStack with 
one click in Cydia or NitoTV.

The 99$ AppleTV mutated into a full web server. 
The iPad/iPhone/iPod Touch can also be used.

Now you can host own Cloud, WordPress, TYPO3, Contao, WebsiteBaker, 
myPhpAdmin, GetSimple, Dokuwiki, all on your iDevice. User can have their own personal wiki, hobbyists can run their own cheap 
web server, web designer can work without an internet connection.

To take advantage of this release you will simply need to add http://ios-webstack.tk/cydia to your Cydia installation. For the Apple TV users, simply make sure your Apple TV 2 is already jailbroken and you have NitoTV installed. This will enable you to add this address into Cydia with three easy steps:

1. Launch the Terminal app (Mac) or PuTTY (Windows)

2. Connect to your Apple TV via SSH using the following command

ssh root@apple-tv.local

echo “deb http://ios-webstack.tk/cydia/ ./” > /etc/apt/sources.list.d/ios-webstack.list

apt-get update

For more details, visit the developer’s official support site, where you can find a  detailed GETTING STARTED guide.

Visit What's on iPhone for the best iPad and iPhone app reviews!
Do you want to feel like a wizard? Check the Kymera wand in Amazon: You can control your Apple TV waving a wand!

We have had XBMC 11.0 Eden for 8 months now and, if you are anything like me, it is time to begin the process of upgrading our XBMC installations to the new & improved XBMC 12.0 Frodo. The process should be fairly straight forward and essentially identical to the process we used for install the previous version of XBMC. Before we get started let’s clear the air on a few points so that we are all on the same page:

• This is a BETA release and as such may result in some unexpected behaviors.
• This is the 1’st BETA XBMC has released, there will be more to come.
• XBMC Frodo can cause a good time and may be habit forming.
• To install Frodo to Apple TV 1 you will need to:

- Visit OpenElec.tv regarding their 2.0 project
- Visit Stnlabs.comregarding their 2.0 project

How to install XBMC 12.0 Frodo (beta 1) APPLE TV 2 (Running iOS 5+)

Requirements

• Jailbroken ATV2 running iOS 5+
• Mac Computer (use Terminal App)
• Windows PC (use PuTTY App)

Step 1: Launch the “Terminal” or “PuTTY” application.

Step 2: Ensure that your computer and your Apple TV are on the same network.

Step 3: Connect to your Apple TV via SSH using the following commands.

• ssh root@[Your Apple TV’s I.P. Address]

Example: ssh root@192.168.2.18
This can be found under General/Network on your ATV’s main menu

Note: Should you receive an “Authentication Error,” copy and paste the following command into the Terminal window and press Enter, then continue.

• rm ~/.ssh/known_hosts

Step 4: Agree to any Security Prompts by typing “yes” (without quotations), then press Enter.

Step 5: When prompted for a Password, type the word “alpine” (without quotations) then press Enter.

Step 6: Copy and Paste the Following Commands into your Terminal App, pressing the Enter key after each. It’s important that you wait for each one to finish before moving onto the next. Don’t worry… you will know when each line is finished.

1)      apt-get install wget

2)      wget -O- http://apt.awkwardtv.org/awkwardtv.pub | apt-key add -

3)      echo “deb http://apt.awkwardtv.org/ stable main” > /etc/apt/sources.list.d/awkwardtv.list

4)      echo “deb http://mirrors.xbmc.org/apt/atv2 ./” > /etc/apt/sources.list.d/xbmc.list

5)      apt-get update

6)      apt-get install org.xbmc.xbmc-atv2

7)      reboot

Step 7: Once the Apple TV menu reloads, Launch XBMC into XBMC Frodo!

Step 8: To ensure the new build fits your screen, let’s enter the “Settings” sub menu under the “SYSTEM” heading.

Step 9: Select the “Appearance” tab from the left menu bar.

Step 10: Under the “Skin” menu, you’ll now want to choose “-4%” for the “Zoom” field so that your XBMC configuration will properly fit your television display. Depending on the television, you might have to play around with this, but it should work flawlessly at the “-4%” setting. Press “MENU” on your Remote Control to return back one level once this is done.

Congratulations! Your second generation Apple TV running iOS 5+ now has XBMC Frodo installed on it, and fitting on your screen. Now that wasn’t so bad… was it?

• More on FRODO from Apple TV Hacks : XBMC 12.0 Frodo (beta 1) released: One media center to rule them all!
• More on FRODO from XBMC.ORG
• Installation on other platforms.

Visit What's on iPhone for the best iPad and iPhone app reviews!
Do you want to feel like a wizard? Check the Kymera wand in Amazon: You can control your Apple TV waving a wand!

If a jailbroken Apple TV loaded with XBMC 11.0 “Eden” was not enough for you, we have some great news. XBMC has just released their first public BETA of XBMC 12.0 “Frodo”. The team has been hard at work pushing out one of their fastest, and most feature-rich, upgrades in history. As of the release of Eden, XBMC’s current stable build that is likely installed on all of your Apple TV’s, the team promised the beginning of a new monthly building plan that would hopefully expedite the process of fixing bugs and updated releases. As of this week, it would appear that this plan has, in fact, worked.

For those of you who have been following XBMC you will notice that the naming paradigm has shifted with this release. Up to now, XBMC has named all of their releases according fantastical points on the map, either real or imagined, such as Camelot, Babylon, and Eden. With the release of 12.0, now in the “F” category, the team did something special in naming it FRODO. Where I initially thought the name was chosen to pay homage to one of my favorite literary characters from a ‘certain collection’ of stories, I was surprised to learn that it was actually intended to honor a team member. I will let them explain:

Ten years ago, an individual with the username Frodo joined the Xbox Media Player team, bringing along his open source software project called YAMP. With the addition of Frodo’s project the three founders, Frodo, d7o3g4q, and RUNTiME, released the first non-beta version of the Xbox Media Player – XBMP 2.0 – as open source software. Frodo then spearheaded the move from XBMP to the more feature rich XBMC, including acting as the primary author for the initial UI engine.

XBMC FRODO FEATURES (that ATV owners will enjoy):

• HD audio support, including DTS-MA and Dolby True-HD, via the new XBMC Audio Engine
• Live TV and PVR support [this is awesome news!]
• h.264 10bit (aka Hi10P) video software decoding for anime
• 64bit support in OSX to match the 64bit support in Linux
• Improved image support, allowing the database to accommodate numerous image types
• Improved Airplay support across all platforms
• Advanced Filtering in the library
• Advanced UPnP sharing numerous JSON-RPC updates, including PVR support, optimizations, better conflict handling, and better webserver support by Montellese
• PVR timeshift support (if the backend supports timeshift)
• the CD ripper now works in the background thanks to Spiff
• panoramic photo panning support

PLEASE NOTE

In hopes to give you the best information possible, we felt it would be worth pointing out that, though this is exciting, this is a BETA release! This version has yet to be labeled STABLE for a reason. For many people these builds work out just fine, as XBMC is a fantastic team, but this can vary from machine to machine. So in the heart of full-disclosure, here are a few words of warning from XBMC Developers themselves:

Needless to say, this is beta software. You should absolutely expect problems to occasionally crop up. At present, we are anticipating a number of issues as we switch XBMC over from the Eden addon repository to a new Frodo repository, including partly broken skins and various scripting/scrapers errors. Please bear with us if these problems do crop up. Additionally, PVR users will not be able to switch channels via the channel up/down buttons using their remotes or CEC due to a slight change in the way PVR keymaps are being handled. We are aware of this issue and should have it fixed by Beta2.

For those of you who may be chomping at the bit to get a glimpse of the newest build, in action, on your Apple TV(1 or 2) simply check back with us shortly. We will be posting a complete guide on how to install Frodo on your Apple TV!

More news on FRODO from XBMC.ORG.

Visit What's on iPhone for the best iPad and iPhone app reviews!
Do you want to feel like a wizard? Check the Kymera wand in Amazon: You can control your Apple TV waving a wand!

If you are a fan of jailbreaking your Apple TV’s, or even your iDevice (iPad, iPhone, iPod), then you are likely aware of XBMC. This awesome multi-media platform has worked its way from the original XBOX all the way to your Apple TV 2, and even your iPod Touch. Though installing XBMC is one of the easiest hacks to through on your jailbroken Apple product, getting XBMC set up correctly, and effectively, is a process that can take the better part of a year to learn, understand, and master. That is, until the release of the new XBMC HUB Wizard.

The team over at XBMC HUB, including myself, work tirelessly to develop addons, build tools, offer support, and provide guidance for all XBMC users at every technical level. That said, we saw that there was a growing number of individuals who wanted to experience XBMC to the fullest, but felt overwhelmed when trying to get addons installed, repositories set up, or fixes implemented from month-to-month.

It was this realization, and the desire to help simplify the process for the all users including those mainstream individuals, that the folks over at XBMC HUB sought out to build the XBMC HUB Wizard. This tool simply supercharge your current XBMC installation.

Requirements

• Jailbroken Apple TV (or any iDevice) with XBMC already installed (fresh jailbreak and XBMC installation is recommended):

1. How to jailbreak your Apple TV using Seas0nPass
2. How to install XMBC on jailbroken Apple TV

• XBMC HUB Wizard Application (downloadable).

PRE-INSTALLED IN XBMC WIZARD:

Layout Changes

• Custom XBMC HUB App Icon
• Custom Wizard Edition Splash Screen
• Custom XBMC HUB Backgrounds
• XBMC HUB RSS Feeds
• Pre-Configured Addon Shortcuts
• Preset Thumbnail View (where desirable)

System Tweaks

• Live Streaming Fix (libRTMP Updated)
• Joystick Remote Tweak (ATV only)
• Veetle Streaming Fix
• Advanced XML Tweaks (ATV & iOS only)
• Audio Output Setting Change
• Fusion Installer Pre-Configured
• Parental Control Options
• Pre Set Weather for Major US Cities

Pre-Installed Repositories

1. anarchintosh addons
2. bluecop Add-on Repository
3. Bstrdsmkr’s Repository
4. divingmule’s Unofficial Repository
5. Eldorado’s XBMC Addons
6. MaxMustermann’s add-ons
7. Mikey1234′s Addons
8. mortstar’s repo
9. mscreation’s XBMC Addons
10. nixa addons
11. Passion-XBMC.org Add-ons
12. t0mm0′s XBMC Addons
13. XBMC-Adult Addons
14. XBMC.org Add-ons

Pre-enabled Addons

Step 1: Download and Extract the xbmchubWizard.zip file to your Desktop.

Step 2: Launch the “xbmchubWizard.app” application, be sure to confirm you want to “Open” the downloaded application before using it first time, if prompted.

Step 3: On the left side of the application, click on the “Choose Apple TV” dropdown and select your Apple TV device. The computer running this application must be on the same network.

Note: Make sure “Choose Apple TV” is checked initially, then choose your Apple TV, that way it’ll keep up to date with IP Address changes.

Step 4: If you have more than one Apple TV on your network, verify that the IP Address in the lower left corner corresponds with your box. You can find the IP Address of your Apple TV by going into the “Settings” -> “General” -> “About” page on your device.

Step 5: Press the “Configure AppleTV 2″ button and wait a few minutes for the process to complete. Please make sure you’ve launched XBMC on your Apple TV at least once before beginning.

Step 6: You’ll see a green check mark and your Apple TV will reboot once finished, you can now begin enjoying your reborn XBMC experience.

Congratulations! Your Apple TV is now supercharged with everything pre-configured.

Visit What's on iPhone for the best iPad and iPhone app reviews!
Do you want to feel like a wizard? Check the Kymera wand in Amazon: You can control your Apple TV waving a wand!

Apple has just updated the second and third-generation Apple TV software to version 5.1 (build 10A406e). The biggest changes include support for Shared Photo Streams, the ability to switch between iTunes accounts and to send audio content from Apple TV to AirPlay-enabled speakers and devices. Apple TV 2 jailbreakers: as always – stay away from this update for now if you don’t want to lose your jailbreak.

Apple TV hacker and developer nitoTV tweeted that he doesn’t recommend updating to 5.1:

If you own an Apple TV 3, you’re obviously not going to lose any jailbreak updating to 5.1, however the upcoming Apple TV 3 jailbreak may only support 5.0 (5.0.1, 5.0.2) firmware.

If you still think like updating to 5.1, here are the direct download links:
AppleTV2,1_5.1_10A406e_Restore.ipsw
AppleTV3,1_5.1_10A406e_Restore.ipsw

And here is the full list of new features in Apple TV 5.1:

• Shared Photo Streams — Accept invitations for Shared Photo Streams, browse photos and comments, and receive notifications of new content.
• AirPlay — Send audio content from Apple TV to AirPlay-enabled speakers and devices (including AirPort Express and other Apple TVs). Also includes the ability to require an onscreen code to use AirPlay with your Apple TV.
• iTunes account switching — Save multiple iTunes accounts and switch quickly between them.
• Trailers — Search movie trailers. In the United States, see show times for local theaters.
• Screen savers — New Cascade, Shrinking Tiles, and Sliding Panels screen savers.
• Main menu— Reorder icons on the second page by holding down the select button on the remote.
• Subtitles — SDH support for the deaf and hard-of-hearing as well as improvements to viewing and selecting subtitles.
• Network configuration — Support for setting up advanced network options using configuration profiles.
• Stability and performance — Includes general performance and stability improvements.

[image: iLounge]

Visit What's on iPhone for the best iPad and iPhone app reviews!
Do you want to feel like a wizard? Check the Kymera wand in Amazon: You can control your Apple TV waving a wand!

Desperately awaiting the release of a jailbreak for Apple TV 3? It may take a while, you know that, right? Meanwhile, how about digging your old, already jailbroken 1st gen Apple TV out of the closet and supercharging it with the newest aTV Flash? FireCore has just released aTV Flash 4.5 for the original Apple TV that includes support for Mountain Lion as well as a handful of general improvements and fixes.

What’s new in aTV Flash 4.5?

• Added support for OS X 10.8 (Mountain Lion)
• Added active memory management (to keep things running smoothly)
• Added ability to copy files between playlists
• Resolved Smart Installer bug
• Other miscellaneous improvements and fixes

FireCore has also said they are still working on a number of additional features for the ATV1 and plan to have additional updates available soon.

Version 4.5 of aTV Flash is available through the Downloads tab in your account. If you’re already running aTV Flash on your Apple TV you can update through the Maintenance –> Manage Plugins menu.

Also read: How to install XBMC 11.0 Eden on first-generation Apple TV

Visit What's on iPhone for the best iPad and iPhone app reviews!
Do you want to feel like a wizard? Check the Kymera wand in Amazon: You can control your Apple TV waving a wand!